HP Envy 5647 Printer Setup

123 HP Envy 5647 Printer Setup

HP’s Envy 5647 is an all-in-one printer with fine characteristics that lets you to print from practically anyplace. You can also use apps to print wirelessly from mobile devices. As with all inexpensive printers, the hardware has a tendency to run noisily, and the ink could cost you exceedingly depending on your usage pattern. Download and install the printer software from 123.hp.com/envy 5647 or hp.support.com. This section is dedicated to HP Envy 5647 Printer Setup.

It’s one of the Envy printer models that can connect HP’s ePrint service, which can be utilized in a two types of ways: you can either email documents to the printer, which it will then print, or you can connect it to the Google Cloud Print service and print documents from there. In addition, you can print from mobile devices as long as you have the suitable app installed. It is for Apple devices, and HP ePrint for Android devices.

To start with, open the box. Fold back the flutter so the things can be detached effortlessly. Take the accessories of the printer available in the box and keep it aside.  Now you can remove the printer from the box.

A software  installation CD will be available in the package. If you would like to check for updated drivers, visit 123.hp.com/support instead of using the installation CD. Remove the packaging materials like tapes, stickers and many more from the inside of the printer carefully.close the scanner lid after removing the materials.


Remove the thin piece of film from the control panel. Slide out the input tray and remove the tap from the tray. Adjust the paper width guide. Close the input tray until it clicks into its place.

Setup the hardware connections after removing the packing materials and plug in the powercord connections. Select the language and country/region to finish the setup. Insert the ink cartridges and load the paper into the main tray. The printer will print an alignment page.

After that, download and install the printer software from 123.hp.com/setup5647 or hp.support.com. The printer software is available in both the websites. You can select any one website.

Confirm that your 123 HP Envy 5647 printer and your Windows computer are connected to the same wireless network. Once that is guaranteed, you can advance with the printer software setup. Below given is the wireless setup in HP Envy 5647 printers

Take note of your wireless Network name (SSID) and Password. These are mandatory to connect your HP Envy 7864 printer and computer to your wireless network.

After carrying out the above steps, you can download the latest version of the driver or you can also install the HP envy 7864 wireless setup using the installation disc.

Go to hp.com/setup 5647 or 123.hp.com/envy5647 from your browser either Chrome or Mozilla. Type your printer model number as “HP envy 7864 ” in the box mentioned and click Begin.

A new page will open, containing the HP envy 5647 driver software. Now click Download and save that file. Double click on the downloaded driver software setup file to open the HP envy 5647 printer installation wizard.

Click Next and follow the instructions for finishing on your Windows computer.

Most up to date version of the HP envy 5647 driver or software supports Windows 10 operating system. Users are recommended to confirm the compatibility of the driver installation software before downloading. This completes the HP Envy 5647 Printer Setup.